Charge Controllers Morningstar

SunSaver


Morningstar’s SunSaver is the world’s leading solar controller for small to mid-sized solar systems. The SunSaver design offers outstanding performance and value for battery over-charge protection.

More Info

Features:

• CSA Class 1, Div 2 Groups A, B, C, and D
• Terminal Block
• Status Lights
• Built-in Temperature Compensation
• Sealed/Flooded Battery Select

Morningstar Sunsaver Model Specs

Model   SS-6L-12V SS-6-12V SS-10-12V SS-10L-12V SS-10L-24V SS-20L-12V SS-20L-24V
Description   SunSaver-6 Amp with LVD (12 Volt) SunSaver-6 Amp (12 Volt) SunSaver-10 Amp (12 Volt) SunSaver-10 Amp with LVD (12 Volt) SunSaver-10 Amp with LVD (24 Volt) SunSaver-20 Amp with LVD (12 Volt) SunSaver-20 Amp with LVD (24 Volt)
Solar Rating   6 Amps 6 Amps 10 Amps 10 Amps 10 Amps 20 Amps 20 Amps
Load Rating   6 Amps N/A N/A 10 Amps 10 Amps 20 Amps 20 Amps
System Voltage   12 Volts 12 Volts 12 Volts 12 Volts 24 Volts 12 Volts 24 Volts

Top

SunSaver Duo

More Info

Morningstar’s SunSaver Duo is an advanced PWM two battery controller for RV’s, caravans, boats and cottages.

This technology provides:
• Two Battery Charging
• Backlit Remote Meter
• Easy Installation
• Lower Cost

More Info

Features:
• Solar charge current is shared between the two batteries.
• Two battery charging eliminates the added cost of two separate solar charging systems.
• Remote meter may be mounted in or on a wall and displays digital and pictorial status information.

 

Top

ProStar

Morningstar’s ProStar is the world’s leading mid-range solar controller for both professional and consumer applications.

More Info

Features:

• 3 position battery select (gel, sealed or flooded)
• Temperature compensation
• Reverse polarity protection
• Status LEDs and meter display
• 100% solid state

Morningstar ProStar Model Specs

Model   PS-15 PS-15M PS-15M-48V PS-15M-48V-PG PS-30 PS-30M PS-30M-PG
Description   ProStar-15 Amp (12/24 Volt) ProStar-15 Amp with Meter (12/24 Volt) ProStar-15 Amp with meter (48 Volt) ProStar-15 Amp with meter (48 Volt, positive ground) ProStar-30 amp (12/24 Volt) ProStar-30 Amp with Meter (12/24 Volt) ProStar-30 Amp with Meter (12/24 Volt, positive ground)
Solar Rating   15 Amps 15 Amps 15 Amps 15 Amps 30 Amps 30 Amps 30 Amps
Load Rating   15 Amps 15 Amps 15 Amps 15 Amps 30 Amps 30 Amps 30 Amps
System Voltage   12 / 24 Volts 12 / 24 Volts 48 Volts 48 Volts 12 / 24 Volts 12 / 24 Volts 12 / 24 Volts

Top

TriStar

Morningstar’s TriStar – Three function solar controller for solar battery charging, load controller or diversion regulations.

More Info

Features:

• Solar arrays up to 4kw
• Status LED’s
• RS-232 communications capability
• Conduit knockouts
• Available digital face plate display or remote digital display

Morningstar TriStar Model Specs

Model   TS-45 TS-60
Description   TriStar-45 Amp TriStar-60 Amp
Solar Rating   45 Amps 60 Amps
Load Rating   45 Amps 60 Amps
System Voltage   12 / 24 / 48 Volts 12 / 24 / 48 Volts

Top

SunLight

Morningstar’s Advanced sunlight solar lighting controller combines the SunSaver design in a fully adjustable lighting package.

More Info

Features:

• Manual test capability
• Suitable for all 12/24 VDC Lamps
• Sealed/flooded battery select
• Temperature compensation
• Fully automatic operation

Morningstar SunLight Model Specs

Model   SL-10L-12V SL-10L-24V SL-20L-12V
Description   SunLight-10 amp with LVD (12 Volt) SunLight-10 Amp with LVD (24 Volts) SunLight-20 Amp with LVD (12 Volts)
Solar Rating   10 Amps 10 Amps 20 Amps
Load Rating   10 Amps 10 Amps 20 Amps
System Voltage 12 Volts 24 Volts 12 Volts

Sunsaver MPPT

2

Morningstar’s SunSaver MPPT solar controller with TrakStar Technology is an advanced maximum power point tracking (MPPT) battery charger for off-grid PV systems.

Features:

– Maximizes energy harvest with peak efficiency of 97.5%
– Allows the use of high voltage PV modules including thin films
– Converts 36V or 24V solar to 12V battery charging
– May be used as a diversion controller for wind or microhydro

1 More Info

Morningstar SunSaver MPPT Model Specs

 

Top

Tristar MPPT

Features:

– Maximizes Energy Harvest
– Extremely High Reliability
– Very High Efficiency
– Extensive Networking and Communication Capabilities
– Metering and Data Logging

1 More Info

 

SunKeeper


Morningstar’s SunKeeper™ solar controller provides a low cost regulated output directly from the solar module to maximize battery life in small solar power applications.

1 More Info

SunGuard SG-4


Morningstar’s SunGuard™ is the world’s leading single module controller. We have combined all the advantages of our SunSaver charging circuit with less expensive packaging to provide an economical controller for small PV systems.

1 More Info

SureSine SI-300-115V-UL


The SureSine™ is a 300 watt pure sine wave inverter (12 volt DC input) designed specifically for remote off-grid photovoltaic (PV) systems. It is an ideal inverter for rural electrification projects, telecom, remote cabins and weekend homes, and RV or caravans and boats. The SureSine’s combination of performance, features and competitive price provides the best small inverter value on the market.

1 More Info

SureSine SI-300-220V


The SureSine™ is a 300 watt pure sine wave inverter (12 volt DC input) designed specifically for remote off-grid photovoltaic (PV) systems. It is an ideal inverter for rural electrification projects, telecom, remote cabins and weekend homes, and RV or caravans and boats. The SureSine’s combination of performance, features and competitive price provides the best small inverter value on the market.

1 More Info

ProStar MPPT PS-MPPT-25


The NEW ProStar MPPT™ is a mid-range MPPT solar charge controller with TrakStar Technology™ that provides maximum power point tracking (MPPT) battery charging for off-grid photovoltaic (PV) systems up to 1100 watts. Available with and without advanced built-in meter. This device is ideal for industrial and residential applications. A Wire Box accessory to reduce hazards associated with exposed wires and connections can be purchased separately.

1 More Info

ProStar MPPT PS-MPPT-25M


The NEW ProStar MPPT™ is a mid-range MPPT solar charge controller with TrakStar Technology™ that provides maximum power point tracking (MPPT) battery charging for off-grid photovoltaic (PV) systems up to 1100 watts. Available with and without advanced built-in meter. This device is ideal for industrial and residential applications. A Wire Box accessory to reduce hazards associated with exposed wires and connections can be purchased separately.

1 More Info

ProStar MPPT PS-MPPT-40


The NEW ProStar MPPT™ is a mid-range MPPT solar charge controller with TrakStar Technology™ that provides maximum power point tracking (MPPT) battery charging for off-grid photovoltaic (PV) systems up to 1100 watts. Available with and without advanced built-in meter. This device is ideal for industrial and residential applications. A Wire Box accessory to reduce hazards associated with exposed wires and connections can be purchased separately.

1 More Info

ProStar MPPT PS-MPPT-40M


The NEW ProStar MPPT™ is a mid-range MPPT solar charge controller with TrakStar Technology™ that provides maximum power point tracking (MPPT) battery charging for off-grid photovoltaic (PV) systems up to 1100 watts. Available with and without advanced built-in meter. This device is ideal for industrial and residential applications. A Wire Box accessory to reduce hazards associated with exposed wires and connections can be purchased separately.

1 More Info

SunLight SL-20L-24


Morningstar’s SunLight™ solar lighting controller combines the SunSaver design with an advanced microcontroller for automatic lighting control functions.

1 More Info

TriStar MPPT TS-MPPT-30


Morningstar’s TriStar MPPT solar controller with TrakStar Technology™ is an advanced maximum power point tracking (MPPT) battery charger for off-grid photovoltaic (PV) systems up to 3kW.

1 More Info

TriStar MPPT 600V TS-MPPT-60-600V-48


Morningstar’s TriStar MPPT 600V charge controller leverages Morningstar’s innovative TrakStar™ MPPT technology and our 20+ years of power electronics engineering excellence, to enable the widest input operating voltage range available from a solar array, wind turbine or hydro input. This controller’s standard and DB versions are for off-grid applications, and the TR versions were developed to enable retrofitting grid-tied systems with battery backup.

1 More Info

TriStar MPPT 600V TS-MPPT-60-600V-48-DB


Morningstar’s TriStar MPPT 600V charge controller leverages Morningstar’s innovative TrakStar™ MPPT technology and our 20+ years of power electronics engineering excellence, to enable the widest input operating voltage range available from a solar array, wind turbine or hydro input. This controller’s standard and DB versions are for off-grid applications, and the TR versions were developed to enable retrofitting grid-tied systems with battery backup.

1 More Info

TriStar MPPT 600V TS-MPPT-60-600V-48-DB-TR


Morningstar’s TriStar MPPT 600V charge controller leverages Morningstar’s innovative TrakStar™ MPPT technology and our 20+ years of power electronics engineering excellence, to enable the widest input operating voltage range available from a solar array, wind turbine or hydro input. This controller’s standard and DB versions are for off-grid applications, and the TR versions were developed to enable retrofitting grid-tied systems with battery backup.

1 More Info

TriStar MPPT 600V TS-MPPT-60-600V-48-DB-TR-GFPD


Morningstar’s TriStar MPPT 600V charge controller leverages Morningstar’s innovative TrakStar™ MPPT technology and our 20+ years of power electronics engineering excellence, to enable the widest input operating voltage range available from a solar array, wind turbine or hydro input. This controller’s standard and DB versions are for off-grid applications, and the TR versions were developed to enable retrofitting grid-tied systems with battery backup.

1 More Info

DIN Rail Mounting Clips DIN-1


These rugged plastic clips have been custom made to match the mounting holes on the SunSaver controllers and to either snap on to the middle of the rail or to slide on from the end of the rail. The clips also provide a mechanism to allow easy removal of the controller from the DIN rail without removing the clips.

1 More Info

Ethernet MeterBus Converter EMC-1


The New Ethernet MeterBus Converter (model: EMC-1) enables IP based network and internet connectivity to any Morningstar product that features an existing MeterBus port (RJ-11).

1 More Info

Ground Fault Protection Device GFPD-150V


Morningstar’s Ground Fault Protection Device products are built to provide a superior solution to ground fault protection for both off-grid and on-grid PV systems. The GFPD products’ are available in two model versions (GFPD-150V and GFPD-600V) to support 150V and 600V PV system breaker stacks.

1 More Info

Ground Fault Protection Device GFPD-600V


Morningstar’s Ground Fault Protection Device products are built to provide a superior solution to ground fault protection for both off-grid and on-grid PV systems. The GFPD products’ are available in two model versions (GFPD-150V and GFPD-600V) to support 150V and 600V PV system breaker stacks.

1 More Info

MeterHub HUB-1


The MeterHub allows up to 15 Morningstar products on a single MeterBus network. The product electrically isolates devices that supply power to the network, preventing damage to the network in the event of grounding problems. Five status LED’s indicate the proper network connection to each port. The MeterHub is suitable for either wall or DIN rail mounting.

1 More Info

PC MeterBus Adapter MSC


Morningstar’s PC Meterbus Adapter (MSC) converts a controller’s meter port (RJ-11 phone type connector) to a standard RS-232 serial connector for connection to a PC or other equipment. The MSC may be used with any Morningstar controller or inverter equipped with a meter connection that does not also already have a RS-232 port.

1 More Info

ProStar MPPT Wire Box PS-MPPT-WB


The Wire Box for ProStar MPPT (model: PS-MPPT-WB) provides an effective cover for wires and conduit leading to and from the ProStar MPPT controller. This Wire Box may be required or recommended by authorities having jurisdiction to reduce hazards associated with exposed wires, conduits and connections.

1 More Info

Relay Driver RD-1


Morningstar’s RelayDriver™ is a logic module which provides high level system control functions such as high/low voltage alarms, load control and generator start.

1 More Info

Remote Meter RM-1


Morningstar’s Remote Meter (RM-1) is a universal, four digit display with custom icons that is compatible with several Morningstar controllers and inverters. This meter provides comprehensive system information for easy monitoring including voltage, current and temperature.

1 More Info

EIA-485/RS-232 Communications Adapter RSC-1


By converting to EIA-485, the RSC-1 allows up to 128 Morningstar products to communicate on the same communication bus and over much greater distances.

1 More Info

Remote Temperature Sensor RTS


The RTS is recommended whenever the temperature of the battery varies more than 5°C (9°F) during the year.

1 More Info

TriStar Digital Meter-2 TS-M-2


The meter will display a great deal of information about the TriStar controller and the operation of your system. In addition, the meter enables manual functions and controller diagnostics. These capabilities will increase your confidence that the system is working properly and will help you to improve system reliability, battery life, and system performance. It is worth the time getting to know your meter!

1 More Info

TriStar Meter-2-600V TS-M-2-600V


The TriStar Meter-2-600V specifically designed for the TriStar MPPT-600V displays extensive system and controller information, logged data, bar graph metering as well as alarms and faults for easy troubleshooting. The information may be shown in English, French, German, Portuguese or Spanish languages.

1 More Info

TriStar Remote Meter-2 TS-RM-2


The meter is compatible with the TriStar, TriStar MPPT, TriStar MPPT 600V, and MeterHub. It displays the same data as the TS-M-2, however, it does not mount to the controller. It ships with 30 meters of cable and a flat face plate for convenient mounting away from the controller. The meter enables manual functions and controller diagnostics. These capabilities will increase your confidence that the system is working properly and will help you to improve system reliability, battery life, and system performance.

1 More Info

USB MeterBus Adapter UMC-1


The USB MeterBus Adapter (model: UMC-1) converts the Morningstar MeterBus RJ-11 electrical interface to a standard USB 2.0 interface which allows communication between a PC and a Morningstar charge controller or inverter.

1 More Info