When the power requirements of the system are beyond the capacity of a single MS-PAE Series inverter or the system is expanded as more loads are added, up to four MS-PAE Series inverters can be connected together in a parallel configuration. When connecting inverters in parallel, the overall inverter power and surge capacity is increased to power a large single load or more smaller loads.
Available in 4000 (24 volts) and 4400 (48 volts) watt models, the MS-PAE Series inverters are powerful, easy-to-use and ETL listed to the stringent requirements of UL 1741 and CSA C22.2 No. 107.1-01 for Renewable Energy installations.
The MS Series is ETL listed to the stringent requirements of UL/cUL 458 for mobile use and UL 1741 for off grid installations.
Install the ME series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power
The MM Series is ETL Listed to the stringent requirements of UL/cUL 458. Available in 600 and 1200 watt models, the MM Series inverters are powerful, easy-to-use, and best of all, cost effective.
The MMS Series inverter is designed to accommodate entertainment systems and small appliances in smaller RVs and boats in an all new design. Based on the popular ME and MS Series inverters, the MMS is smaller, lighter and less expensive while retaining all the built in protection and reliability of ME and MS models. The MMS charger uses a PFC (Power Factor Corrected) charger, which is 85% efficient and the same charger technology used in all Magnum models.
The MMS Series is ETL Listed to the stringent requirements of UL/cUL 458, CSA C22.2 #107.1-01 and meets the KKK-A-822E standard.